All 15 courses
From first circuits to STM32 firmware, IoT systems, PCBs and robots. Tap any course for what you'll build, prerequisites and fees. Courses run in launch phases — Phase 1 opens first.
Two fee options for every course: course only, or with take-home kit (handed over in session 1 and yours to keep). Fees for individuals include 18% GST. Exactly two electronics courses: EC-01 Basic and EC-04 Advanced.
Phase 1
First batches — start hereEC-01 FoundationBasic Electronics — Hands-On Foundations
Basic Electronics — Hands-On Foundations
How circuits really work — from Ohm's law to transistors, op-amps, 555 timers and soldering — at safe low voltages.
What you will build
- Adjustable LM317 bench power supply (1.25 to about 9 V)
- LDR automatic night lamp
- Dark-detector comparator
- Logic-gate alarm / half adder
- 555 flasher soldered on perfboard
What you will learn
- Voltage, current, resistance and power with a multimeter
- Reading schematics and breadboarding
- Diodes, rectifiers and regulated power supplies
- Transistor and MOSFET switches, relays and motors
- Op-amp comparator and buffer, logic gates, 555 timer
- Safe soldering and reading datasheets
Mains/AC is theory and trainer demo only — students work at 12 V or below.
Under-14s solder only under direct supervision (goggles, fume extraction, lead-free solder).
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-01EC-02 Foundation (kids & teens)Arduino & Robotics for Beginners — Junior 10–12 / Senior 13–15
Arduino & Robotics for Beginners — Junior 10–12 / Senior 13–15
From a blinking LED to a moving robot — kids build, code and present a finished project.
What you will build
- Traffic-light controller
- Smart night lamp
- Distance alarm
- Line-follower or obstacle-avoider robot
- Own-idea gadget
What you will learn
- Simple Arduino programs
- Sensors, motors and how robots decide
- Building a motor chassis
- Showing and explaining a project
Batch capped at 10, with one trainer and one assistant.
Sessions 1–2 are an electronics warm-up for children without EC-01.
A parent of Junior students attends session 1.
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-02EC-03 Foundation (bridge)Python & Linux for Hardware — Bridge course
Python & Linux for Hardware — Bridge course
The Linux shell and Python you actually need to talk to hardware — in six weeks.
What you will build
- Sensor logger (Pico 2 W + BMP280) streaming to a Python plot and CSV
What you will learn
- Linux command line essentials
- Python basics for hardware
- Reading sensors and logging data
- Plotting and saving results
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-03Phase 2
Next step after Phase 1EC-04 IntermediateAdvanced Electronics — Analysis, Analog Design & Power
Advanced Electronics — Analysis, Analog Design & Power
The second of our two electronics courses: circuit analysis, simulation, analog design, signal conditioning and power.
What you will build
- Audio chain: mic preamp → active filter → LM386
- Sensor-to-0–5 V signal conditioner
- R-2R DAC
- 555-PWM motor controller
- Discrete boost converter
- Capstone on perfboard
What you will learn
- Circuit analysis and theorems
- Simulation with Falstad and ngspice
- Oscilloscope and function generator
- BJT amplifier and op-amp circuits, active filters
- ADC/DAC, PWM and motor drivers
- Noise, grounding, decoupling and troubleshooting
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-04EC-05 IntermediateArduino Advanced — Registers, Interrupts, PID & Data Logging
Arduino Advanced — Registers, Interrupts, PID & Data Logging
Arduino the professional way: registers, interrupts, non-blocking code, PID control and wireless links.
What you will build
- PID temperature controller
- Homing linear stage
- RTC / SD-card data logger
- Two-board radio link
- Capstone project
What you will learn
- Registers, timers and interrupts
- Non-blocking multi-task code
- PID control from first principles
- Data logging and wireless links
- Debugging multi-module systems
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-05EC-06 Intermediate–AdvancedIoT Systems Engineering with ESP32
IoT Systems Engineering with ESP32
Build a secure, self-hosted IoT system end to end — nodes, broker, database, dashboards and alerts.
What you will build
- Secure multi-node sensor network: ESP32 + ESP32-C3 → Mosquitto (TLS) → InfluxDB / Grafana + Home Assistant, with alerts
What you will learn
- ESP32 Wi-Fi and BLE
- MQTT and self-hosted brokers with TLS
- Time-series data and dashboards
- Alerts, IoT security and updates
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-06EC-07 Foundation–Intermediate3D Design & Printing for Makers
3D Design & Printing for Makers
Turn an idea into a part you can hold: CAD, design for printing, and enclosures for your electronics.
What you will build
- Tolerance gauge
- Snap-fit box
- Enclosure with threaded inserts
- Your own product capstone
What you will learn
- CAD fundamentals
- Design for 3D printing and tolerances
- Materials and print troubleshooting
- Enclosures for boards and modules
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-07Phase 3
SpecialisationEC-08 IntermediateMechanics & Mechanisms for Robotics
Mechanics & Mechanisms for Robotics
The other half of robotics: gears, torque, belts, linkages and arms — learned with your hands.
What you will build
- Gear-train speed reducer
- Belt drive
- 4-DOF arm pick-and-place
- Mechanism capstone
What you will learn
- Forces, torque, gears and bearings
- Choosing motors for a load
- Linkages and mechanisms
- Basic fabrication
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-08EC-09 IntermediatePCB Design (KiCad) & Fabrication
PCB Design (KiCad) & Fabrication
Design, order, assemble and test your own circuit board — fabricated in India.
What you will build
- Group practice board (through-hole + 0603 / SOIC / SOT-23)
- Your own 2-layer capstone board, fabricated in India
What you will learn
- Schematic capture and layout in KiCad
- Manufacturing files and ordering
- Hand-soldering SMD parts
- Testing and documenting a design
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-09EC-10 Intermediate–AdvancedRaspberry Pi & Embedded Linux
Raspberry Pi & Embedded Linux
Embedded Linux on a Raspberry Pi: GPIO, camera, web dashboards and services that start on boot.
What you will build
- Web-controlled camera robot on Raspberry Pi 4
- Flask dashboard
- systemd service
What you will learn
- Embedded Linux on the Pi
- GPIO and sensor interfacing in Python
- Camera and simple vision
- Web apps and services
Optional own-Pi add-on (Raspberry Pi 4, 4 GB): ₹10,700.
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-10EC-11 AdvancedSTM32 Foundations — Bare-metal & HAL
STM32 Foundations — Bare-metal & HAL
Move from Arduino to real firmware on an ARM Cortex-M — registers first, then HAL.
What you will build
- Sensor + TFT + encoder-motor controller, written both bare-metal and with HAL
What you will learn
- ARM Cortex-M and embedded C
- GPIO, clocks, interrupts and timers
- UART, I²C and SPI
- Professional toolchain and debugging
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-11EC-12 AdvancedSTM32 Industrial — CAN, RS-485/Modbus, Low Power & Board Bring-up
STM32 Industrial — CAN, RS-485/Modbus, Low Power & Board Bring-up
Industrial communication, low-power design and bringing up a bare board.
What you will build
- Two-node CAN + Modbus RTU industrial network
- Low-power 18650 battery node
- Bring-up report for a bare board
What you will learn
- CAN and RS-485 / Modbus RTU
- Low-power modes
- Board bring-up and test
- Industrial debugging habits
Offered only to students who own the NUCLEO-G474RE from EC-11; the kit is an add-on.
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-12Phase 4
Advanced & capstoneEC-13 AdvancedRTOS & Embedded Firmware Architecture — FreeRTOS / Zephyr
RTOS & Embedded Firmware Architecture — FreeRTOS / Zephyr
Multi-task firmware with queues, semaphores and timing analysis — the skill embedded employers ask for.
What you will build
- Multi-task controller on FreeRTOS
- Sensor app ported to Zephyr
What you will learn
- Tasks, queues and semaphores
- Firmware architecture
- Timing and CPU-load analysis
- FreeRTOS and Zephyr
Reuses the EC-11 kit — the “with kit” price is for students coming from outside EC-11.
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-13EC-14 AdvancedMobile Robotics & Manipulation
Mobile Robotics & Manipulation
Bring electronics and mechanics together in a complete robot with odometry, behaviours and an arm.
What you will build
- Encoder-odometry robot with line-follow, wall-follow and obstacle behaviours
- Pick-and-place arm
What you will learn
- Motor drivers, encoders and power
- PID speed and heading control
- Kinematics and odometry
- Robot arms
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-14EC-15 CapstoneProduct Development Capstone
Product Development Capstone
In a team, take a product from idea to a working prototype with two PCB spins, an enclosure and a pitch.
What you will build
- Team product with two PCB spins
- 3D-printed enclosure
- Documentation and cost sheet
- Pitch
What you will learn
- Requirements and architecture
- Breadboard to PCB iterations
- Testing and reliability
- Pitching a working prototype
Fees include 18% GST. Certificate: EmptyCore Certificate of Completion (80%+ attendance and capstone pass; “with Distinction” at 85%+).
Enquire about EC-15Coming soon
Not open for enrolmentROS 2 Robotics — Jazzy, Nav2
Indicative: age 17+, after EC-03 + EC-14, about 36 × 2 h. ROS 2 nodes, launch files, TF2, URDF, Gazebo, SLAM and Nav2 on a Raspberry Pi robot.
Not open for enrolment. No fees or dates yet — ask to be notified.
Drone Engineering
Indicative: age 18+ for outdoor flying, about 28 × 2 h. Frames, motors/ESCs, LiPo safety, flight controllers, PID tuning, simulation first. Launches only after DGCA Drone Rules 2021 compliance is in place.
Not open for enrolment. No fees or dates yet — ask to be notified.
Fee summary
| Code | Course | Age | Hours | Course only | With kit |
|---|---|---|---|---|---|
| EC-01 | Basic Electronics | 12+ (Class 7 and above) | 48 h | ₹10,500 | ₹12,100 |
| EC-02 | Arduino & Robotics for Beginners | 10–12 (Junior) or 13–15 (Senior) | 39 h | ₹11,500 | ₹13,600 |
| EC-03 | Python & Linux for Hardware | 15+ | 24 h | ₹6,000 | ₹7,600 |
| EC-04 | Advanced Electronics | 15+ (Class 10 and above) | 52 h | ₹14,000 | ₹17,200 |
| EC-05 | Arduino Advanced | 14+ | 56 h | ₹17,000 | ₹22,700 |
| EC-06 | IoT Systems Engineering with ESP32 | 16+ | 72 h | ₹18,500 | ₹22,400 |
| EC-07 | 3D Design & Printing for Makers | 13+ | 56 h | ₹13,500 | ₹16,100 |
| EC-08 | Mechanics & Mechanisms for Robotics | 15+ | 56 h | ₹14,500 | ₹19,200 |
| EC-09 | PCB Design (KiCad) & Fabrication | 16+ | 56 h | ₹14,500 | ₹17,400 |
| EC-10 | Raspberry Pi & Embedded Linux | 16+ | 56 h | ₹16,500 | ₹21,800 |
| EC-11 | STM32 Foundations | 17+ | 44 h | ₹17,500 | ₹24,100 |
| EC-12 | STM32 Industrial | 17+ | 36 h | ₹12,000 | ₹14,800 |
| EC-13 | RTOS & Embedded Firmware Architecture | 17+ | 48 h | ₹18,500 | ₹25,100 |
| EC-14 | Mobile Robotics & Manipulation | 16+ (17+ recommended) | 72 h | ₹26,000 | ₹34,500 |
| EC-15 | Product Development Capstone | 17+ | 48 h | ₹16,000 | ₹18,000 |
Payment options
- ₹1,000 registration holds your seat and is adjusted against the fee.
- Fees above ₹12,000 can be paid 50% at enrolment and 50% by the middle session (kit premium in the first instalment).
- Fees for individuals include 18% GST. College / corporate quotes are ex-GST.
Discounts (one per enrolment)
- Early bird 10% — paid 15+ days before start
- Returning student 10%
- Sibling 10%
- Referral credit — ₹1,000 or 10% of tuition, whichever is lower
- Discounts apply to tuition only; kit premiums are never discounted.
Batches & programs
- 8–12 learners per batch (EC-02: up to 10, with an assistant)
- 2 sessions a week — weekday evenings or weekend mornings
- One scholarship seat per batch at 50% tuition (when the batch has 10 paying students)
- College and corporate programs on request (25+ learners)